First Time Use - auna multimedia 10026947 Mode D'emploi

• Press STANDBY again to switch the unit on.
• Press STANDBY to switch the unit off (standby mode).
Disconnect the AC adapter from the mains socket if you want to switch the unit off completely. This will prevent the
radio from switching on after a power cut.
Fitting Batteries
You can fit batteries (not supplied) to your radio for portable operation.
• Press the battery cover catches (arrowed).
• Lift off the battery cover.
• Fit 4 x 'C'/LR14 batteries into the battery compartment, observing polarity as shown.
• Re-fit the battery cover.
Dispose of used batteries with regard to the recycling regulations in your area. Do NOT short
circuit batteries or throw them into water, the general rubbish or in a fire.
Initial Scan
When your radio is switched on from Standby for the first time it will scan the DAB band, searching for usable stations.
These will be stored alphanumerically.
The initial scan will take a few minutes. While the scan is running, the scan progress will be shown on a bargraph and
the number of stations found will be displayed.

First time use

15