Introduction A; About This User's Guide A; About The Scorpion 240 Autoloader A - Seagate Scorpion 240 DDS-4 Autoloader Manuel D'installation

Scorpion 240 Autoloader Installation Manual
Introduction
About this user's guide
This user's guide contains information on installing and
operating the Scorpion 240 DDS-4 autoloader.
About the Scorpion 240 autoloader
The Seagate internal Autoloader is a fully integrated,
intelligent, multicartridge tape system that supports the DDS
(Digital Data Storage), DDS-1, DDS-2, DDS-3, and DDS-4
tape formats. It includes a magazine that can accommodate
up to six tape cartridges.
The internal autoloader (STDL42401LW) is designed to be
installed inside a computer, in a 5.25-inch, full-height drive
bay. The external autoloader (STDL62401LW) is a standalone
subsystem that connects to a host system using a 68-pin
shielded SCSI cable.
Note: The Scorpion 240 will not work in a SCSI-1
The Scorpion 240 autoloader combines established DDS
technology, high density recording and hardware data-
compression capability, and Seagate's proven computer-
grade DDS tape drive to provide unmatched reliability and
performance.
environment.
A-7