Albrecht Bambini Mode D'emploi page 24

Channel Scan
(Only available in PMR446 operation)
The channel scan searches all PMR446 channels for signals

Long press the
stops when a signal is detected. You can listen to the channel for 8 seconds until the
scanning starts again.

To disable long press the
The Channel Scan is only available in PMR446 operation.
Call Melody
To select a call melody

Press the M button seven times. The display shows C followed by the flashing
current setting.

Press ▲/▼ to select the call melody from 01 to 03 or of.

Briefly press the PTT button or simply wait 5 seconds.
Call

Briefly press the

The unit transmits a call melody to all other units on this channel within your
range. The call melody can be selected or disabled in the menu.
The Call function is only available in PMR446 operation.
Keypad Lock
All keys (except the PTT button and On/Off) can be locked to prevent accidentally pushing
the buttons.
Lock keypad:

Press and hold the M-button for approx. 3 seconds, until the lock icon
displayed.
Unlock keypad:

Press and hold the button again for approx. 3 seconds, until the lock icon turns off.
VOX – Hands-Free Function
This is the sensitivity setting for hands-free operation. The unit detects your voice,
there is no need to press the PTT button. This is very useful if you have no free hand to
press the PTT button; but it can be a problem on a motorbike or in a noisy environment.
The hands-free function responds to noise and transmits without you knowing and
possibly interrupting the channel.
24
button to start scanning; press again to stop scanning. Scanning
button again.
button.
English
is