Albrecht Bambini Mode D'emploi page 20

Automatic Out-Of-Range Function
The automatic Out-Of-Range function is activated by default in babysitter mode and
needs no further settings.
This function automatically checks every 60 seconds if baby and parent units are in
communication range. The parent unit internally sends a range request, which is
answered by the baby unit. In case there is no reply for more than 2 minutes, then both
units are no longer communicating. This can be due to a dead spot, the batteries of the
other unit being exhausted, the unit is turned off or there may be interferences on the
used channel.
As long as a connection exists, the
in case the communication is interrupted and 5 beep tones are audible on the parent
unit every time a range request fails.
After 2 minutes the icon is displayed constantly again if the unit is again within the
range of the other unit.
Activation and Deactivation of the Out-Of-Range Function
The out-of-range function can also be deactivated if not needed. Activation and
deactivation must always be made at the unit, which shall control the other (in case of
baby monitoring, this is always the parent's radio)

Press the M button twice until OU is displayed left on the display. The current
setting, AU, Pb or OF is flashing on the right side of the display.

By ▲/▼ select AU to activate the
the parent unit)
Select Pb (=Press button) to activate the manual out of range function on
request

Select OF to disable the Out-Of-Range Function.

Briefly press the PTT button or simply wait 5 seconds to confirm.
Manual Out-Of-Range Test
You can manually determine if the other unit is within range. The out-of-range function on the
parent unit must be set to Pb

Press the
and the parent unit plays a melody. Now you can be sure that you are within the
communication range.
This test is also available with the out-of-range function deactivated on the baby unit!
20
icon is constantly displayed. The icon flashes
button and wait a few seconds. The baby unit answers your request
English
automatic function (only available on