Warnings And Restrictions - imacon Flextight Precision II Guide De L'utilisateur

Masquer les pouces Voir aussi pour Flextight Precision II:

Les langues disponibles

Hardware ReferenceÑFlextight Precision II

Warnings and Restrictions

¥ Read all of the included documentation before attempting to install

and use the scanner.

¥ Do not touch the originals and/or the original holder while scan-

ning.

¥ Do not start scanning or previewing until an original holder with an

original has been mounted.

¥ The original holder is only to be mounted or removed when the

drum is in the load position.

¥ When you turn on the scanner, the drum will roll to the load posi-

tion, if it is not there already. Do not touch the scanner while the

drum is rotating.

¥ Do not place your Þngers or any other object into the scanner while

it is connected to power.

¥ Before servicing or opening the scanner, the power supply must be

disconnected from the mains (unplugged). It is not sufÞcient simply

to press the on/off button.

¥ Install the scanner in a location where children can not get to it. It

contains small openings and moving parts that can cause injury.

Imacon Flextight Precision II UserÕs Guide

Table des Matières