Portrait Versus Landscape For 35Mm - imacon Flextight Precision II Guide De L'utilisateur

Masquer les pouces Voir aussi pour Flextight Precision II:

Les langues disponibles

Hardware ReferenceÑFlextight Precision II

Portrait Versus Landscape for 35mm

The 35mm Þlm holder contains space for both a portrait and a land-

scape positioning, as shown in Figure 6. You can only use one of these

at a time. There are two options because, due to the orientation of the

light source and CCD inside the scanner, each of these two orientations

has slightly different properties.

¥ More light is allowed to pass in a landscape image because it is wide

in the same direction as the light source. This means that the scanner

can capture higher densities, which results in greater shadow detail.

However, the resolution when scanning in this orientation is limited

to 3200 dpi. If shadow details are more important than resolution,

then use the landscape (36x24) orientation (the top frame).

¥ In the portrait orientation, less light is able to pass through the origi-

nal, but the scanner is able to zoom to a higher resolution. Resolu-

tions of up to 5760 dpi are possible. If resolution (i.e. enlargement) is

more important than shadow details, then the portrait (24x36) orien-

tation (the bottom frame).

Figure 6:

35mm original holder

36x24, Landscape

Higher density,

Imacon Flextight Precision II UserÕs Guide

max. 3200 dpi

24x36, Portrait

Lower density,

max. 5760 dpi

Table des Matières