Caple CM209SS Manuel D'instructions page 47

Once the end-of-cooking time is entered, the display will flash the current time again and
the "end-of-cooking time" symbol will be lit.
The countdown starts now. When the set time has been reached, the oven will beep and the heating elements
will turn off, ending cooking. The following words will appear on the display: "Program finished remove the dish":
press any button to stop the beeping or open the door.
After eight seconds, the oven will automatically turn off, if other cooking functions have not been set.
Timer programming: delayed cooking
By combining the two modes, "cooking time" and "end-of-cooking time", you can program the oven so that
cooking starts later than the current time.
For example, if you want to go out at 8:30 and you want a roast to be ready when you return at 13:00, do this:
Prepare the roast for cooking and
put it in the oven
Turn on the oven, select the cooking function and set the temperature.
Set the end-of-cooking time by touching the "+"
and "-" symbols.
Then set the cooking time, which we assume to be
two hours.
Now, set the end-of-cooking time: the control
normally adds the cooking time to the current
time, so it proposes an end-of-cooking time,
which in our case would be 10:30 (8:30+2:00).
47
GB