Important; First Use; Assembling And Disassembling The Flat Grill - Caple CM209SS Manuel D'instructions

IMPORTANT

The oven's identification plate is even accessible when the appliance is installed. This identification plate, which
is visible when you open the door, shows all the information you will need when requesting replacement parts for
the appliance.
GB

FIRST USE

The oven should be thoroughly cleaned with soap and water and carefully rinsed.
Heat the oven for about 30 minutes at the maximum temperature; this eliminates all the residual manufacturing
oils that could cause unpleasant odours during cooking. Use the circular plus fan function without accessories
in the oven. Before using the accessories for the first time, clean them carefully with a very hot alkaline washing
solution and a soft cloth.

ASSEMBLING AND DISASSEMBLING THE FLAT GRILL

To remove the flat grill, pull the grill towards you until it stops and then lift, by pulling upwards, until it comes
completely out.
To put the flat grill back in, insert it at a 45-degree angle and then position it horizontally and push it all the way
in to the end of the grill track.
If the flat grill has a drip-pan (tray), to remove it, lift slightly and slide it towards you. To reinsert it, slide it back
until it is correctly seated.
36