Joie stages fx Mode D'emploi page 8

6. Press button to open the locking
clip.
14
7. Thread the diagonal belt through
the locking clip, and then fasten
the locking clip.
15
8. Refasten the locking clip.
16
!
Please check if child restraint is
installed tightly by moving the
child restraint back and forth at
the vehicle belt path. Please
reference vehicle owner's manual
for more information. (Child
restraint should not move more
than 25mm/1").
13
14
13
15
16
Correctly assembled vehicle belt is shown as
!
Waist belt passes through the lap belt guidings , as
!
Shoulder belt must passes through the rear-facing vehicle shoulder belt
-2
slot, as
17
!
The vehicle buckle tongue is engaged with the buckle correctly, as
17
ii. Securing your Child in the Child Restraint
Use Infant Insert
We recommend using the full
infant insert while the baby
is 0-9 months or until they
outgrow the insert. The
infant insert
increases side impact
protection.
17
-1
17
17
3
Detach the snaps on the head support to
remove the head portion of the insert.
-3
2
14