Operating Instructions - continued
OVERLOADING/OVERHEATING
This winch is rated for intermittent duty. It should not be operated with the motor slowed down to a low
RPM. When the motor approaches stall speed, a very rapid heat build-up occurs which may cause motor
damage. Double line rigging will reduce the amperage draw from the motor allowing longer continual use
(see rigging section).
Maintenance & Warranty
MAINTENANCE
No lubrication is required for the life of the winch.
Inspect the wire rope before and after each winching operation. Replace when damaged.
If warranty sheet is lost or misplaced contact:
© 2017 Copyright Warn Industries, Inc. All rights reserved.
WARRANTY
See separate sheet packed with winch
Warn Industries, Inc.
Customer Service Dept.
12900 SE Capps Rd
Clackamas, OR 97015-8903.
United States:
Phone: 503.722.1200 or (800) 543-9276 (US only)
Fax:
International:
Phone: 503.722.3008
Fax:
PAGE 14
-Or-
503.722-3000
503.722.3005
99387 Rev. A0