Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
EN
Introduction
Thank you for purchasing an Evolution
place today. Evolution is committed to you having a positive experience and a lifetime of great
operation with your new engine.
It is important that you read the engine manual before starting the engine for the first time.
Evolution radial engines have different requirements than engines that you may have operated
in the past. The manual provides important information for installing the engine, selecting the
correct propeller and proper engine break-in procedures.
Engine Specifications
cylinders
capacity
capacity per cylinder
bore
stroke
power
crankshaft thread size 8 x 1mm
RPM range
maximum RPM
engine diameter
engine length
weight
fuel usage (approx.)
propellers
Needed to Complete
• Propeller
• Fuel line (3mm or 3.5mm ID)
• Engine mounting screws
Installing the Engine in the Airframe
Properly installing the engine to either the airframe or an engine test stand for break-in is crucial
to getting the most power and longest life from your engine.
WARNING: Always attach the engine mounting ring to a flat plate surface, such as
6–8mm plywood or carbon fiber plate.
WARNING: Never use a standoff between the firewall and the mounting ring. Vibration
between the standoff and the mounting ring will damage the mounting ring and cause
the engine to separate from the airframe.
®
radial engine, one of the finest engines in the market-
EVOE 735
7
2.1 cu in (34.9cc)
0.3 cu in (5.0cc)
0.71 in (18mm)
0.79 in (20mm)
2.2 hp
1000–6300
6700
7.3 in (185mm)
6.3 in (159mm)
3.1 lb (1.4 kg)
1.0 oz (28 ml)/min
2-Blade
17 x 8, 17 x 10,
17 x 12, 18 x 8
• Engine baffles
• On-board glow driver (optional)
• Glow driver battery
(1.2V 6000–9000mAh Ni-MH battery required)
EVOE 777
7
4.7 cu in (77cc)
0.66 cu in (11cc)
0.93 in (23.7mm)
0.98 in (25mm)
4.8 hp
10 x 1mm
1000–6000
6300
9.1 in (23 cm)
7.9 in (20 cm)
5.7 lb (2.6 kg)
2.2 oz (62 ml)/min
2-Blade
22 x 12, 24 x 10
3-Blade
22 x 10
EVOE 999
9
6.0 cu in (99cc)
0.66 cu in (11cc)
0.93 in (23.7mm)
0.98 in (25mm)
6.0 hp
10 x 1mm
1000–6000
6300
10.2 in (26 cm)
7.9 in (20 cm)
7.7 lb (3.5 kg)
2.8 oz (80 ml)/min
2-Blade
26 x 10, 24 x 12
Publicité
Table des Matières
