Horizon Hobby E-Flite Park 370 Outrunner Manuel D'instructions

EN
Park 370 Outrunner Instructions (EFLM1200, EFLM1205, EFLM1210HS)
NOTICE
All instructions, warranties and other collateral documents are
subject to change at the sole discretion of Horizon Hobby, Inc. For
up-to-date product literature, visit horizonhobby.com and click on
the support tab for this product.
Meaning Of Special Language
The following terms are used throughout the product literature
to indicate various levels of potential harm when operating this
product:
WARNING: Procedures, which if not properly followed, create the
probability of property damage, collateral damage, and serious
injury OR create a high probability of superficial injury.
CAUTION: Procedures, which if not properly followed, create
the probability of physical property damage AND a possibility of
serious injury.
NOTICE: Procedures, which if not properly followed, create
a possibility of physical property damage AND a little or no
possibility of injury.
WARNING: Read the ENTIRE instruction manual to become
familiar with the features of the product before operating.
Failure to operate the product correctly can result in damage to the
product, personal property and cause serious injury.
This is a sophisticated hobby product and NOT a toy. It must be
operated with caution and common sense and requires some basic
mechanical ability. Failure to operate this Product in a safe and
responsible manner could result in injury or damage to the product
or other property. This product is not intended for use by children
without direct adult supervision. Do not attempt disassembly, use
with incompatible components or augment product in any way
without the approval of Horizon Hobby, Inc. This manual contains
instructions for safety, operation and maintenance. It is essential
to read and follow all the instructions and warnings in the manual,
prior to assembly, setup or use, in order to operate correctly and
avoid damage or serious injury.
CAUTION: This product can become extremely hot when in
use, which could lead to burns.
Age Recommendation: Not for children
under 14 years. This is not a toy.
Thank you for purchasing the E-flite ® Park 370 Brushless Outrunner
motor. The Park 370 is designed to deliver clean and quiet power for
small 3D airplanes weighing 7- to 14-ounces (200 g-400 g).
Features
• Upgrade your Speed 280 and Speed 370 applications
• Excellent motor for small 3D airplanes 7 oz–14 oz (200 g–400 g)
• Motor mount included
• Prop adapter and gold-plated connectors included
• Slotted 12-pole outrunner design
• EFLM1210HS features a 4mm hollow shaft and optimized 1200
Kv – it is ideal for variable pitch operation
Park 370 Specifications
EFLM1200 EFLM1205 EFLM1210HS
Diameter 28mm (1.10") 28mm (1.10") 28mm (1.10")
Case Length 25mm (1.00") 25mm (1.00") 25mm (1.00")
Weight 45g (1.6 oz.) 45g (1.6 oz.) 45g (1.6 oz.)
Shaft Diameter 3.17mm (1/8") 3.17mm (1/8") 4mm (.16")
1080 1360 1200
Kv
(rpms per volt) (rpms per volt) (rpms per volt)
.70A @ 10V 1.00A @10V .60A @ 10V
Io (no load (no load (no load
current) current) current)
.19 ohms .10 ohms .18 ohms
Ri
(resistance) (resistance) (resistance)
Continuous 9A* 12A* 10A*
Current
Max Burst 11A* 15A* 12A*
Current
Input Watts up to 110
up to 150 up to 120
6-10 Ni-Cd/Ni- 6-10 Ni-Cd/ 6-10 Ni-Cd/
Cells Mh, 2-3 Li-Po Ni-Mh, 2-3S Ni-Mh, 2-3S
Li-Po Li-Po
Recommended 9×4.7-10×4.7 8×6-10×4.7 / 8×3.8-10×4.7
Props 8×3.8 (3 cell)
Brushless ESC 10-30-Amp 10-30-Amp 10-30-Amp
NOTICE: The Maximum Operating Temperature is 220°F (104°C).
Adequate cooling is required for all motor operation at maximum
current levels. Maximum Burst Current duration is 15 seconds.
Adequate time between maximum burst intervals is required for
proper cooling and to avoid overheating the motor. Maximum Burst
Current rating is for 3D and limited motor run flights. Lack of proper
throttle management may result in damage to the motor since
excessive use of burst current may overheat the motor.
Battery Choices
®
We recommend E-flite batteries for the Park 370 Brushless
Outrunner Motor, depending on the airplane application. Battery
technology is constantly changing and manufacturers are improving
and updating older packs with new ones. Please refer to your
model's manual or our website for recommended batteries.
EFLB12502S 7.4V 1250mAh 2-Cell LIPO, EC3
EFLB15002S 7.4V 1500mAh 2-Cell LIPO, EC3
EFLB18002S 7.4V 1800mAh 2-Cell LIPO, EC3
EFLB4502SJ30 7.4V 450mAh 2-Cell LIPO, JST
EFLB8002SJ30 7.4V 800mAh 2-Cell LIPO, JST
EFLB13003S20 11.1V 1300mAh 3-Cell LIPO, EC3
EFLB18003S30 11.1V 1800mAh 3-Cell LIPO, EC3
EFLB4503SJ30 11.1V 450mAh 3-Cell LIPO, JST
EFLB4503SJ50 11.1V 450mAh 3-Cell LIPO, JST
EFLB8003SJ30 11.1V 800mAh 3-Cell LIPO, JST
EFLB15003S40 11.1V 1500mAh 3-Cell LIPO, EC3
Accessories and Spare Parts
See our web site at www.E-fliteRC.com or www.horizonhobby.
com for our complete line of brushless motors. We have posted a
specification comparison sheet on our web site so you can compare
the different motors we offer.
EFLA110 Power Meter (measures power output in amps,
volts, watts, and capacity)
EFLA241 Gold Bullet Connector Set, 3.5mm (3)
EFLM1923 Prop Adapter w/ Collet, 1/8"
EFLM1924 Prop Adapter w/Collet, 4mm
EFLA1010 10A Pro Brushless ESC
EFLA1030B 30A Pro SB Brushless ESC (V2)
EFLM1201 Replacement Shaft: Park 370 BL Outrunner
EFLM1211 Replacement Hollow Shaft, 4mm: Park370,
1200Kv (for EFLM1210HS only)
EFLM1301 Replacement Shaft: Park 400 BL Outrunner
EFLM1914 Prop Saver
EFLPVPP100 Show Stopper Precision Variable Pitch Prop
System
Changing Shaft Orientation
This Outrunner motor has a shaft, which exits through the rotating
part of the motor. If you want to reverse the shaft to exit through
the fixed part of the motor, follow these instructions carefully for
changing the shaft installation.
NOTE: The user assumes all liability for damage that may occur.
1. Loosen the set screw on the shaft collar and remove the collar
from its location against the bearing.
2. Remove the small black donut washer that rests against the
bearing.
3. Loosen the two set screws in the rotating part of the motor.
4. Slide the shaft through the motor. It may be necessary to use a
small hammer to lightly tap the shaft. It is very important that you
do not bend the shaft in this process so use extreme caution to
assure this does not happen.
5. Re-install the donut washer against the bearing. Do not skip this
step.
6. Re-install the shaft collar back against the washer and bearing.
7. Retighten all setscrews making sure you line up with the flat spot
on the shaft.
Operating Instructions
1. This brushless motor requires the use of a sensorless brushless
speed control. Failure to use the correct speed control may result
in damage to the motor and/or speed control.
2. When mounting the motor, be sure the correct length of screws
are used so damage to the inside of the motor will not occur.
We suggest you use the mounting hardware included with your
motor. The use of long screws will damage the motor.
3. You may connect the three motor wires directly to the controller
with solder or use connectors such as gold plated brushless
bullet connectors (EFLA243), which will also need to be soldered
properly to your wires. The three motor wires can be connected
in any order to the three output wires or output port on a
sensorless brushless speed control. Be sure to use heat shrink
tubing to properly insulate the wires so the wires will not short.
Shorting may damage the motor and speed control.
4. If you add connectors and or you no longer wish to use them,
never cut the motor wires. Remove them by properly de-soldering
them. Shortening the motor wires is considered an improper
modification of the motor and may cause the motor to fail.
5. When you connect the motor to the esc, check the rotation
direction of the motor. If you find the rotation is reversed,
switching any two motor wires will reverse the direction so the
motor rotates properly.
6. Proper cooling of the motor is very important during operation.
New technology has brought much higher capacity batteries
with higher discharge rates, which can cause extreme motor
temperatures during operation. It is the responsibility of the user
to monitor the temperature and prevent overheating. Overheating
of the motor is not covered under any warranty.
7. You can install the propeller on the motor shaft after you have
confirmed proper rotation direction. Also consult the instruction
included with your sensorless electronic speed control for proper
adjustments and timing.
8. Once the battery is connected to the motor, please use extreme
caution. Stay clear of the propeller during operation. Spinning
propellers are very dangerous as the motors produce high
amounts of torque.
NOTICE: Never disassemble the motor. This will void any warranty.
NOTICE: Any modification of the motor that is not approved by
Horizon, including changing the motor wires, may damage the
motor. It will also void the warranty and result in refusal of service
by Horizon.
CAUTION: The Outrunner motor case is a rotating part so use
extreme caution. Please read the warning information included
with your propellers for safety information related to the operation of
motors with propellers. Failure to comply with these warnings and/or
improper use of propellers may result in serious injury.
1 Year Limited Warranty
What this Warranty Covers
Horizon Hobby, LLC, (Horizon) warrants to the original purchaser that
the product purchased (the "Product") will be free from defects in
materials and workmanship for a period of 1 year from the date of
purchase.
What is Not Covered
This warranty is not transferable and does not cover (i) cosmetic
damage, (ii) damage due to acts of God, accident, misuse, abuse,
negligence, commercial use, or due to improper use, installation,
operation or maintenance, (iii) modification of or to any part of the
Product, (iv) attempted service by anyone other than a Horizon
Hobby authorized service center, (v) Product not purchased from an
authorized Horizon dealer, (vi) Product not compliant with applicable
technical regulations, or (vii) use that violates any applicable laws,
rules, or regulations.
OTHER THAN THE EXPRESS WARRANTY ABOVE, HORIZON MAKES NO
OTHER WARRANTY OR REPRESENTATION, AND HEREBY DISCLAIMS
ANY AND ALL IMPLIED WARRANTIES, INCLUDING, WITHOUT
LIMITATION, THE IMPLIED WARRANTIES OF NON-INFRINGEMENT,
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE
PURCHASER ACKNOWLEDGES THAT THEY ALONE HAVE DETERMINED
THAT THE PRODUCT WILL SUITABLY MEET THE REQUIREMENTS OF
THE PURCHASER'S INTENDED USE.
Purchaser's Remedy
Horizon's sole obligation and purchaser's sole and exclusive remedy
shall be that Horizon will, at its option, either (i) service, or (ii) replace,
any Product determined by Horizon to be defective. Horizon reserves
the right to inspect any and all Product(s) involved in a warranty claim.
Service or replacement decisions are at the sole discretion of Horizon.
Proof of purchase is required for all warranty claims. SERVICE OR
REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE
PURCHASER'S SOLE AND EXCLUSIVE REMEDY.
Limitation of Liability
HORIZON SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT,
INCIDENTAL OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR
PRODUCTION OR COMMERCIAL LOSS IN ANY WAY, REGARDLESS OF
WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, TORT,
NEGLIGENCE, STRICT LIABILITY OR ANY OTHER THEORY OF LIABILITY,
EVEN IF HORIZON HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES. Further, in no event shall the liability of Horizon exceed the
individual price of the Product on which liability is asserted. As Horizon
has no control over use, setup, final assembly, modification or misuse,
no liability shall be assumed nor accepted for any resulting damage
or injury. By the act of use, setup or assembly, the user accepts all
resulting liability. If you as the purchaser or user are not prepared to
accept the liability associated with the use of the Product, purchaser
is advised to return the Product immediately in new and unused
condition to the place of purchase.
Law
These terms are governed by Illinois law (without regard to conflict of
law principals). This warranty gives you specific legal rights, and you
may also have other rights which vary from state to state. Horizon
reserves the right to change or modify this warranty at any time
without notice.
WARRANTY SERVICES
Questions, Assistance, and Services
Your local hobby store and/or place of purchase cannot provide
warranty support or service. Once assembly, setup or use of the
Product has been started, you must contact your local distributor
or Horizon directly. This will enable Horizon to better answer your
questions and service you in the event that you may need any
assistance.
Contact Information
Country of
Horizon Hobby
Purchase
Horizon Service Center
servicecenter.horizonhobby.com/RequestForm/
(Repairs and Repair Requests)
productsupport@horizonhobby.com
Horizon Product Support
North America
(Product Technical Assistance)
877-504-0233
websales@horizonhobby.com
Sales
800-338-4639
For questions or assistance, please visit our website at www.
horizonhobby.com, submit a Product Support Inquiry, or call the
toll free telephone number referenced in the Warranty and Service
Contact Information section to speak with a Product Support
representative.
Inspection or Services
If this Product needs to be inspected or serviced and is compliant in
the country you live and use the Product in, please use the Horizon
Online Service Request submission process found on our website
or call Horizon to obtain a Return Merchandise Authorization (RMA)
number. Pack the Product securely using a shipping carton. Please
note that original boxes may be included, but are not designed to
withstand the rigors of shipping without additional protection. Ship
via a carrier that provides tracking and insurance for lost or damaged
parcels, as Horizon is not responsible for merchandise until it arrives
and is accepted at our facility. An Online Service Request is available
at http://www.horizonhobby.com/content/_service-center_render-
service-center. If you do not have internet access, please contact
Horizon Product Support to obtain a RMA number along with
instructions for submitting your product for service. When calling
Horizon, you will be asked to provide your complete name, street
address, email address and phone number where you can be reached
during business hours. When sending product into Horizon, please
include your RMA number, a list of the included items, and a brief
summary of the problem. A copy of your original sales receipt must
be included for warranty consideration. Be sure your name, address,
and RMA number are clearly written on the outside of the shipping
carton.
NOTICE: Do not ship LiPo batteries to Horizon. If you have any issue with
a LiPo battery, please contact the appropriate Horizon Product Support
office.
Warranty Requirements
For Warranty consideration, you must include your original sales
receipt verifying the proof-of-purchase date. Provided warranty
conditions have been met, your Product will be serviced or replaced
free of charge. Service or replacement decisions are at the sole
discretion of Horizon.
Non-Warranty Service
Should your service not be covered by warranty, service will be
completed and payment will be required without notification or
estimate of the expense unless the expense exceeds 50% of the retail
purchase cost. By submitting the item for service you are agreeing
to payment of the service without notification. Service estimates
are available upon request. You must include this request with your
item submitted for service. Non-warranty service estimates will be
billed a minimum of ½ hour of labor. In addition you will be billed for
return freight. Horizon accepts money orders and cashier's checks,
as well as Visa, MasterCard, American Express, and Discover cards.
By submitting any item to Horizon for service, you are agreeing to
Horizon's Terms and Conditions found on our website http://www.
horizonhobby.com/content/_service-center_render-service-center.
ATTENTION: Horizon service is limited to Product
compliant in the country of use and ownership. If
received, a non-compliant Product will not be serviced.
Further, the sender will be responsible for arranging return
shipment of the un-serviced Product, through a carrier of
the sender's choice and at the sender's expense. Horizon
will hold non-compliant Product for a period of 60 days from
notification, after which it will be discarded.
Phone Number/Email Address Address
2904 Research Rd
Champaign, Illinois, 61822 USA
10/2015