Features; Programming Track Numbers; Clearing The Program - Philips EXPANIUM Mode D'emploi

Features

Programming track numbers

You can select up to 50 tracks and store them in the memory in a desired
sequence.You can store any track more than once.
Select a track with ∞ or §.
1
2
Press PROGRAM to store the track.
is shown and P with the number
PROGRAM
of stored tracks is displayed.
3
Select and store all desired tracks in this way.
If necessary, press 9 to stop normal playback.
4
Press 2; to start playback of the program.
Playback of the program starts.
To add additional tracks to your program, press
0 0
9 to stop playing the program and continue
with step 1.
You can review the program by pressing
0 0
PROGRAM for more than 3 seconds.
All stored tracks are displayed in sequence.

Clearing the program

If necessary press 9 to stop playback.
1
Press 9 to clear the program.
2
CLEARED is displayed,
and the program is cleared.
Notes:
The program will also be cleared if you open
the CD compartment or interrupt the power
supply or if the unit switches off automatically.
After storing 50 tracks, PROGRAM FULL
is scrolled.
20
disappears
PROGRAM
PROGRAM
T I T L E
PROGRAM