Checks; Qg-A: Leg Pad Position; Qg-B: Pressure While Standing Straight; Qg-C: Structure Body Shape Fit - Laevo V2.57 Mode D'emploi

8

Checks

2
TIP
Perform these checks while using the figures from the Quick-Guide. Figure numbers are
f
indicated as QG-A, QG-B, etc.
8.1

QG-A: Leg pad position

QG-B: Pressure while standing straight

8.2
While standing straight, pressure of the chest pad on the chest should be limited. It is okay for the
chest pad to come loose from the body.
If necessary, adjust the angle of the torso structures by adjusting the angle block (QG-14).
f
QG-C: Structure body shape fit
8.3
The torso structures follow the contours of the body and the arm should be free to move.
If necessary, adjust the width of the torso structures (QG-12).
f
8.4

QG-D: Chest pad hits the neck

While you are bending forward, the chest pad can slide. This is normal.
2
NOTICE:
Unusable product or risk of discomfort
1. Tighten the back lower hip belt.
2. Adjust the smart joints towards the back of the body (QG-11).
3.
Bend with more hip rotation and less spine or neck bending.
4. Adjust the length of the torso structures or select shorter torso structures (QG-13).
16
Chest pad hits the throat
V2.57