Troubleshooting; Potential Types Of Problems - Brother QL-560 Guide De L'utilisateur

Troubleshooting

If problems occur while using this printer, the following may help you to solve the
problems.

Potential types of problems

Problem
•
The QL-560 does not
print, or a printing error
is received.
•
The power button does
not light up or flash.
•
The printed label
contains streaks or
poor quality characters,
or the label is not fed
correctly.
•
A data transmission
error appears on the
PC.
•
Labels are jammed in
the cutter or are not
ejected correctly after
printing.
•
The layout style is not
updated when the Add-
in is still activated and a
new label roll is
installed.
•
The P-touch Add-in
icon is not displayed in
®
Microsoft Word.
•
Is the USB cable loose?
Check that the USB cable is connected correctly.
•
Is the DK Roll installed correctly?
If not, remove the DK Rolls and reinstall.
•
Is there enough roll remaining?
Check that there is enough roll remaining.
•
Is the DK Roll compartment cover open?
Check that the DK Roll compartment cover is closed.
•
Is the power supply cord connected correctly?
Check that the power supply cord is connected and plugged in. If
connected correctly, try connecting it to another electrical socket.
* If the power button still does not light up or flash, contact the retail
outlet where the printer was purchased or your local authorized
service centre.
•
Is the print head or roller dirty?
While the print head generally remains clean under normal use, lint or
dirt from the roller may become stuck on the printer head. If this occurs,
clean the roller. Refer to "Roller maintenance" on page 11.
•
Is the correct port selected?
Check that the correct port is selected from the "Print to the following
port" list in the Printer Properties dialog box.
•
Is the QL-560 in cooling mode (the LED lamp is flashing slowly)?
Wait until the LED lamp stops flashing and then try printing again.
•
Does the edge of the cutter unit seem to have lost its sharpness?
•
Do cutter errors occur frequently?
Replace the cutter. For details, refer to "Replacing the cutter unit" on
page 13.
•
Is there dirt or lint on the roller preventing it from rolling freely?
Use a Cleaning Sheet to clean the roller. For details, refer to "Roller
maintenance" on page 11.
•
Was a new label roll installed before activating the P-touch Add-In (The
P-touch function is added to your standard Microsoft toolbar)?
Exit the P-touch Add-In, load the second label roll type, reactivate the
P-touch Add-in, choose "Select Layout", and then verify the layout.
• ®
Is Microsoft Word started up from Microsoft
• ®
Is Microsoft Word chosen for the editor usually used for Microsoft
®
Outlook ?
Due to program limitations, the Microsoft
with the above settings. Quit Microsoft
®
Microsoft Word.
Solution
®
Outlook
®
Word Add-In does not work
® ®
Outlook , and restart
15
STEP
1
STEP
2
®
?
®