Cleaning The Tape Cutter; Monitoring The P-Touch Status; Status Indicator; Troubleshooting - Brother P-Touch 1500 PC Guide De Référence Rapide

Cleaning the tape cutter

After a while, adhesive may accumulate on the
cutter, preventing it from cutting or resulting in the
tape being jammed. Once a year, use a cotton swab
dipped in isopropyl (rubbing) alcohol to clean off
the cutter.
Do not touch the cutter's edge, otherwise
you may be injured.

Monitoring the P-touch Status

You can determine the status of the PT-1500PC from the status indicator.

Status Indicator

Lights up
Flashes a few times
Flashes quickly
Flashes, staying off
longer that it is on
Flashes slowly

Troubleshooting

• The P-touch is operating normally and is in stand-by.
• The P-touch is receiving data from the computer correctly.
• The cassette is not installed. → Install a cassette.
• A transmission error occurred. → Press the power/feed key to turn
the PT-1500PC off, then on again.
• The tape cutter button was pressed while printing → Try printing again.
• An EEPROM error occurred. → Contact your service representative.
• The print head is cooling down. → Wait until printing continues.
Cause→Remedy
Cotton swab
Tape cutter
21