Electrolux E30IC75FSS5 Manuel D'instructions page 2

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

INDUCTION COOKTOP INSTALLATION INSTRUCTIONS
Overhead Cabinet Should Not Exceed a
Maximum Depth of 13" (33 cm)
30" (76.2 cm) Min. Clearance
Between the Top of the
Cooking Platform and the
Bottom of an Unprotected
Wood or Metal Cabinet
24" (61 cm) Min. when
Bottom of Wood or Metal
Cabinet is Protected by Not
Less Than 1/8" (0.3 cm) Flame
Retardant Millboard Covered
With Not Less Than No. 28
MGS Sheet Steel, 0.015"
(0.4 mm) Stainless Steel,
0.024" (0.6 mm) Aluminum
or 0.020" (0.5 mm) Copper.
2 1/2" (6.4 cm) Min. From Edge of
Cutout to Front Edge of Countertop
* Letters on this figure refer to chart on front
page except for J, K and L.
To eliminate the risk of burns
CAUTION
or fire by reaching over heated surfaces,
cabinet storage space located above the
cooktop should be avoided. If cabinet
storage is provided, risk can be reduced by
installing a range hood that projects
horizontally a minimum of 5" (12.7 cm)
beyond the bottom of the cabinets.
K
Min. Recommended
Distance Between Rear
Edge of Cutout and
Nearest Combustible
Surface Above
Countertop
G
18"
(45.7 cm)
H
24"
(61 cm)
MODEL
30"
Figure 2 – COUNTERTOP CUTOUT OPENING
2
A
L
Min.
10"
( 25.4 cm)
I
12"
(30.5 cm)
Install junction box at a
location which will be easy
to reach and that will not
interfere with the cooktop
installation. We suggest
12" (30.48cm) lower than
the countertop.
J
7½" (19.1 cm)
J
Min. From Edge of
Cooktop to Nearest
Combustible Wall
(Either Side of Unit).
If a drawer is present
underneath, allow at least 10"
(25.4 cm) of clearance below
the countertop.
Never store
CAUTION
flammable products in the
drawer.
K
L
1½" (3.8 cm)
30" (76.2 cm)

Publicité

Table des Matières
loading

Table des Matières