Customer Service - Klein Tools ET110 Mode D'emploi

ENGLISH
CALIBRATION
For best results, calibration should be performed by a professional in an
environment with a known concentration of carbon monoxide.
SENSOR REPLACEMENT
When the FAULT icon
sensor must be replaced. This CANNOT be done by the user; please
contact Klein Tools for more information.
BATTERY REPLACEMENT
When the
the batteries must be replaced.
1. Loosen battery screw
remove battery door
2. Remove and recycle spent
AAA batteries.
3. Install 4 new AAA batteries
(note proper polarity).
4. Replace battery door and
fasten securely with screw.
To avoid risk of electric shock, do not operate meter while
battery door is removed.
Be sure meter is turned off and wipe with a clean, dry lint-free
cloth. Do not use abrasive cleaners or solvents.
Remove the batteries when the meter is not in use for a prolonged
period of time. Do not expose to high temperatures or humidity.
After a period of storage in extreme conditions exceeding the limits
mentioned in the General Specifications section, allow the meter to
return to normal operating conditions before using.
Do not place equipment and its accessories in the trash.
Items must be properly disposed of in accordance with local
regulations. Please see www.epa.gov or www.erecycle.org
for additional information.
6
MAINTENANCE
L
appears on the display, the electrochemical
indicator is displayed,
and
11
.
12
CLEANING
WARRANTY
www.kleintools.com/warranty
DISPOSAL / RECYCLE

CUSTOMER SERVICE

KLEIN TOOLS, INC.
450 Bond Street Lincolnshire, IL 60069
1-877-775-5346
customerservice@kleintools.com
www.kleintools.com
STORAGE