4.3. Cuff connection
Insert the cuff tube into the opening provided on the left
side of the instrument, as shown in the diagram.
4.4. Setting the time and date
This blood-pressure monitor incorporates an integrated clock with date display. This has the advantage,
that at each measurement procedure, not only the blood-pressure values are stored, but also the exact
moment of the measurement.
After new batteries have been inserted, the device will request a user to set up time/date.
(Example: Entering 2008-08-15 Time 09:30)
1. After new batteries have been inserted, the display
comes into direct year setting, during which the
4 characters (2005) blink.
2. Enter the correct year by pressing «MEMORY»
button. Each click will change the clock one year.
Example: 3 x press.
3. Press «TIME» button. The display now switches to
the current date, during which the first character
(month) blinks.
4. Enter the current month by pressing the «MEMORY»
button. Example: 7 x press.
5. Please follow the instructions above to set the day,
hour and minutes.
6. After all settings have been made, click the «TIME»
button once. The date is briefly displayed and then
the time. The input is now confirmed and the clock
begins to run.
24
2005
2008
8
08-15