Connecting The Gas Heater To The Stand; Connecting The Gas Heater To The Gas Cylinder - Rothenberger Industrial 035984 Mode D'emploi

Connecting the gas heater to the stand

• Connect the gas heater to the stand
using the supplied wing nut
6
shim and the locking ring
• Tighten the wing nut properly such
that the gas heater is fixed securely
to the stand.

Connecting the gas heater to the gas cylinder

WARNING!
The gas heater should only be connected to commercially available
liquid gas cylinders.
If the gas heater can not be securely fixed, it should not be used.
• Slide the mounting stand over the
collar of the gas cylinder.
• Fix the gas heater including the
mounting stand to the collar of the
cylinder by turning the fixing screw
5
using a size 6 hexagonal key.
035985_Anleitung_DE_GB_FR_IT.indb 29 035985_Anleitung_DE_GB_FR_IT.indb 29
8
,
7
.
Before Use
7
6
8
5
29
29.04.2020 17:10:10 29.04.2020 17:10:10