Important Safety Information - CONFORAMA SABA LV10C44MINI-PLIX Mode D'emploi

Read this Manual
Dear Customer,
• Please carefully read this manual before using the dish-
washer, it will help you to use and maintain the dishwasher
properly.
• Keep it to refer to it at a later date.
• Pass it on to any subsequent owner of the appliance
This manual contains sections on safety Instructions, Operating
GB Instructions, Installation Instructions and Troubleshooting Tips,
etc.
Before Calling for Service
• To review the section on troubleshooting Tips will help you to
solve some common problems by yourself.
• If you cannot solve the problems by yourself, please ask for
the help of professional technicians.
NOTE:
• The manufacturer, following a policy of constant develop-
ment and updating of the product, may make modifications
without giving prior notice.
• This user manual shall also be got from the manufacturer or
responsible vendor.
64

1. Important safety information

When using your dishwasher, follow the
WARNING!
precautions listed below:
• This appliance can be used by children aged from 8 years and
above and persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have
been given supervision or instruction concerning use of the
appliance in a safe way and understand the hazards involved.
Children must not play with the appliance. Cleaning and user
maintenance must not be carried out children unless they
are supervised.
• If the power cord is damaged, it must be replaced by the
manufacturer, their after-sales service or a qualified profes-
sional in order to avoid any hazards.
• This appliance is designed to be used for domestic and simi-
lar purposes, such as:
– kitchens used by employees in shops, offices and other
working environments;
– farms;
– use by guests of hotels, motels and other residential envi-
ronments;
– other bed and breakfast-type accommodation;
• The door must not be left open as this presents a risk of tip-
ping.
• CAUTION: Knives and other sharp utensils must be placed
GB
65