Eurotops 40561 Mode D'emploi page 36

Removing the telescopic swivel handle assembly (2):
Press the release button (3) and pull out the swivel handle assembly (2).
WARNING: Do not turn on the switch when you fit or remove the wheels assembly. This can cause a serious
injury.
●
OPERATING YOUR TOOLS
Warning: insert the safety key before operation. Remove it when no use the machine!
Cutting without swivel handle:
Cutting with swivel handle:
The swivel handle is fully height adjustable and can be adapted to suit your height. And the swivel handles can be inserted
in 8 positions between 0°and 360°.
Warning: Do not turn on the switch when you adjust the swivel handle. This can cause a serious injury.
● CHARGE
The battery can be charged in about 3-5 hours. Be sure to read all safety instructions before using your charger. This
product is not user serviceable. There are no user serviceable parts inside the charger. Servicing at an authorized service
center is required to avoid damage to static sensitive internal components. Read all of the instructions in the battery
charger section to this manual before attempting to charge the battery in your tool.
1. Charging procedure
These chargers require no adjustment and are designed to be as easy as possible to operate.
1. Insert safe lock 1
2. Push lock-off button (2) forward and press
switch (3).
3. Release the lock-off button (2) again.
1. Attach the swivel handle.
2. Hold the tube (3) with one hand, and then loosen the
adjusting bolt (4).
3. Set the handle to the correct length and tighten the
adjusting bolt (4).
4. Push lock-off button (1) forward and press switch (2).
5. Release the lock-off button (1) again.
(1). Connect the power cord of the charger with a wall socket
and the charging socket (1) of the grass and hedge shear.
The charging indicator lamp (2) lights red.
After charging the battery for 4-5 hours, the charging
indicator lamp lights green.
(2). Remove the charger from the grass and hedge shear
and unplug the power cord from the wall socket.
GB