Eurotops 40561 Mode D'emploi page 35

8. To reduce risk of electric shock, unplug charger from outlet before attempting any cleaning. Removing the battery pack
will not reduce this risk.
9. DO NOT store or use the tool in locations where the temperature may reach or exceed 105°F (such as outside sheds or
metal buildings in summer).
10. The charger is designed to operate on standard household electrical power . Do not attempt to use it on any other
voltage!
READ ALL INSTRUCTIONS CAREFULLY AND KEEP IN A SAFE PLACE FOR FUTURE REFERENCE.
1. Do not incinerate the battery even if it is severely damaged or is completely worn out. The battery can explode in a fire.
2. A small leakage of liquid from the battery cells may occur under extreme usage or temperature conditions. Do not use
the tool any more.
3. Do not disassemble burn or short-circuit batteries.
4. Charge the battery only with the chargers supplied with the product.
5. NOTE: The battery in your tool is the lithium-ion type, with no self-discharge or memory effect.
●
ASSEMBLY
Fitting/removing the wheels assembly
WARNING: Do not turn on the switch when you fit or remove the wheels assembly. This can cause a serious
injury.
1， Fitting/removing the telescopic swivel handle
Guide the swivel handle assembly (2) at the desired angle between 0°and 360° into the handle holder of the wheels
assembly (1) until the lock engages.
The starting lockout and ON button on the tools no longer function when the swivel handle is mounted.
1
fit
remove
Fitting the wheels assembly (1):
Push the wheels assembly (1) forward into the
grass shear align the slot until both catches click
into suitable place.
Removing the wheels assembly (1):
Pull the wheels assembly (1) backwards and
remove.
Fitting
removing
GB