Intended Use; Explanation Of Safety Symbols; Safety Instructions - Eurotops 40561 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 8
WARNING:
Read the instructions thoroughly before operating the tool and keep this manual for future reference!
● INTENDED USE
Your hedge trimmer has been designed for trimming hedges, shrubs and brambles, and grass shear is for trimming grass
only, not to be used for any other purpose. This tool is intended for consumer use only.
Your charger has been designed for charging batteries of the type supplied with this tool, NOT ALLOWED TO CHARGE
OTHER BATTERIES.
● EXPLANATION OF SAFETY SYMBOLS
Caution!
Read the operating instructions!
Caution!
Cutting means continues to run after the
motor is switched off!

SAFETY INSTRUCTIONS

· Warning! Carefully observe the instructions in this manual to reduce the risk of personal injury or material damage.
· Read this entire manual carefully before operating the tool.
· Before operating the tool, make sure that you know how to switch the tool off in an emergency .
· Retain this manual for future reference.
General Safety Rules
WARNING! Read all instructions, failure to follow all instructions listed below may result in electric shock, fire and/or serious
injury. The term "power tool" in all of the warnings listed below refers to your battery operated (cordless) power tool.
SAVE THESE INSTRUCTIONS
1) Work area
a) Keep work area clean and well lit. Cluttered and dark areas invite injuries.
b) Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or
dust. Power tools create sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.
2) Electrical safety
a) Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators.
There is an increased risk of electric shock if your body is earthed or grounded.
b) Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric
shock.
3) Personal safety
a) Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power
tool while your tired or under the influence of drugs, alcohol or medication. A moment of inattention while
operating power tools may result in serious personal injury.
b) Use safety equipment. Always wear eye protection. Safety equipment such as dust mask, non-skid safety shoes,
hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.
Danger due to materials blown out of machine!
Remove persons in the vicinity from the danger
area!
Do not expose the device to the damp!
Wear ear and eye protection!
GB

Publicité

Table des Matières
loading

Table des Matières