NEO Stay-Up XS Manuel D'utilisation page 47

Adjustments
The Stay-Up is fully adjustable to fi t your morphology and your preferred fl ight posi-
tion. Before starting the adjustments, loosen every webbing adjuster setting to it's
maximum.
Seat adjustments
First, set all the seat adjustments : these settings allow you to position yourself cor-
rectly in the harness. Sit in the harness and choose your position, set the inclination
and the depth of the seat using the lateral straps. The optimal position is when the
pilots centre of gravity is between the under-seat webbing 1 and 2 (SC1 and SC2).
The position of the centre of gravity has a big infl uence on the stability and the fl ight
component of the Stay-Up.
Inclination : Adjust the lateral straps to sit supine or upright.
Depth of the seat / lumbar: Set the 2 straps to make the harness shallower and
raise the lumbar support. This setting aren't necessarly both tied, only one may be
enough for your confort.
Shoulder straps : Adjust the shoulder straps as normal, but not too strap will complete
the shoulder strap tension.
Under-seat adjustement
The under-seat webbing adjustement is used to adapt the seat place when you
remove the protection. It is really important to keep the setting between the two red
seams otherwise the harness becomes uncomfortable. With the protection, the
setting is completely released.
Gravity center
EN
47