Ribimex Ribiland PRTH509A Manuel D'instructions Et D'utilisation page 21

6.2- Cleaning
a) Clean the plastic parts with a soft and clean cloth and dry the housing carefully.
Do not use aggressive cleansing agents (solvents, abrasive cleansers) or an abrasive sponge or any
sharp objects.
- Do not use any caustic chemicals to clean the plastics parts.
- Never put or immerse the product in water or any liquid, and ensure that water does not penetrate
the tool.
Never splash with water or clean with high pressure hose!
b) After each cutting operation, clean the cutting blade with a soft brush and cloth with lubricating
oil and spray a thin layer of protective oil on the whole blade.
c) Always keep the ventilation slots in motor housing clean. Clean ventilation holes with soft brush.
6.3- Storage
- Keep product, user manual and accessories in the original packaging.
- Clean tool before storage.
- Always lubricate the cutter blade with protective oil spray before storage.
- Store the machine with the supplied cutter blade protection cover (1).
- It is recommended to store the product in a clean, dry location, protected from humidity, frost and
dust, and keep it out of children's reach (e.g. high or in a locked up place).
- Do not store product in temperatures lower than 0ºC (32ºF)
- Do not place or store any object on top of the product.
6.4- Disposal
- Cutting remnants: do not throw with household rubbish or in the environment. Dispose of cutting
remnants in rubbish collection centres or seek advice from your local municipality.
- Tool: do not dispose with household garbage. Do not throw into the environment.
Dispose of the product in a collection centre for waste of electrical and electronic equipment, or a
waste drop-off centre; or seek advice from your local municipality.
- Proceed with disposal of remnants, the tool, accessories and packaging according to local
regulations regarding the protection of the environment.
Page 21 / 31