Installation Instructions
Electrical
!
All wiring must conform to local, state and national
codes.
SPECIFICATIONS
Electric
120 Volt – 50/60 Hz./1 Ph. – 1.8 amp
Voltage –
220 Volt – 50/60 Hz./1 Ph. – 1.8 amp
Cycle – Amp.*
230 Volt – 60 Hz./1 Ph. – 1.8 amp
240 Volt – 50 Hz./1 Ph. – 1.8 amp
Motor
Horsepower
Fuse Size
Ship Weight
Operating
40°F minimum – 110°F maximum
Temperature
Range
*120 Volts – 60 Hz. – 1.8 amp (U.S. Standard) (Eight foot cord with
plug is included with the U.S. Standard unit)
6
Warning
1/7 HP
15 amp maximum
187 pounds
(4° – 43°C)
GROUNDING INSTRUCTIONS
!
The dispenser must be grounded in accordance
with national and local electrical codes.
This appliance must be grounded. In the event of
malfunction or breakdown, grounding provides a path of
least resistance for electric current to reduce the risk of
electric shock. This appliance is equipped with a cord
having an equipment-grounding conductor and a
grounding plug. The plug must be plugged into an
appropriate outlet that is properly installed and grounded
in accordance with all local codes and ordinances.
!
Improper connection of the equipment-grounding
conductor can result in a risk of electric shock. The
conductor with insulation having an outer surface
that is green with or without yellow stripes is the
equipment grounding conductor. If repair or
replacement of the cord or plug is necessary, do not
connect the equipment-grounding conductor to a
live terminal. Check with a qualified electrician or
serviceman if the grounding instructions are not
completely understood, or if in doubt as to whether
the appliance is properly grounded. Do not modify
the plug provided with the appliance — if it will not fit
the outlet, have a proper outlet installed by a
qualified electrician.
Section 2
Warning
Warning
Part Number 000007646 11/10