Disassembling The Rocking Chute/Door & Paddle Wheel Guard - Manitowoc S160 Manuel D'installation, D'utilisation Et D'entretien

Maintenance
DISASSEMBLING THE ROCKING CHUTE/DOOR &
PADDLE WHEEL GUARD
!
Electric Shock Hazard
Unplug unit before servicing or cleaning.
1. Remove the front panel from the dispenser. (See
"Removing the Front Panel".)
2. Remove outer bracket.
3. Remove door lock.
12
Warning
Outer Bracket
4. Lift up left end of door rod and pull rod out from right
side of door.
5. Remove door.
6. Remove ice chute.
7. Pull the paddle wheel guard from the holes inside
the ice dispense snout.
Section 4
Part Number 000007646 11/10