Menu Operation - Nordmende 43A Mode D'emploi

4.5 Menu operation

Multiple device functions and settings can be controlled via the menu. The menu is divided into
the main menu (Apps, Settings, Media, and Signal Sources), submenus, and respective functions/
options.
>
To enter the main menu, press the MENU button on the remote control. To leave the
menu, press the EXIT button. While in a submenu, press the MENU button to jump one
step back.
When the menu is called, you are directly in the main menu Settings.
◄/►
>
Use the
marking (white frame) will move accordingly. Press the OK button to enter a submenu or
function/option.
>
There are several ways to enable/disable a function/option:
Switch on/off (with
several options available (signalled by the white dots below the options, can
be changed with the
another submenu is available. Press the OK button or the
the submenu.
>
To select a Main Menu, press the MENU button (you are now in the Main Menu >
Settings) and the
indicated by a coloured bar below the active main menu. You can now use the
buttons to select Apps, Settings, Media or Signal Sources in the main menu. Press the
arrow button
In these instructions, buttons or menus to be pressed appear in bold. Overlays or
functions/options appear in [square brackets].
4.6 Info box
Each time you switch to another channel, an info box appears at the top of the screen. This info
box displays some information about the currently running programme. The overlay duration
can be adjusted in the menu.
Page 36
▼/▲
and buttons to navigate in the menus and functions/options. The
◄/►
buttons or OK button),
◄/►
buttons),
▲ arrow button
, to return to the submenu selection.
once. You are now in the main menu selection
► arrow button
to enter
◄/►
▼