Putting The Device Into Operation; Scope Of Supply; Mounting On A Wall - Nordmende 43A Mode D'emploi

3 Putting the device into operation

3.1 Scope of supply

1x digital TV set
1x remote control
2x batteries
2x stands, including mounting hardware (stand screws)
1x quick reference guide
3.2 Fixing the stands
1. Place the TV set with its front side on a soft cloth or padding. Position the bottom as
follows.
2. Insert the screws (stand screws supplied in the bag) into the screw holes and tighten
1. Place the TV set on soft cloth or cushion with face down.Place the base in position as shown.
them with a screwdriver.
2. I
3. Place the TV upward.
3. Put the TV set upright again.
Figure 1
Figure 1

Mounting on a wall

Attach an optional wall mount bracket at the rear
of the TV carefully and install the wall mount
bracket on a solid wall perpendicular to the
floor. When you attach the TV to other building
materials, please contact qualified personnel.
LG recommends that wall mounting be
performed by a qualified professional installer.
Page 30
Figure 2
Figure 2
Back Back Front Front
2 screws per side 24": Insert 2 screws
32"/43": Insert 4 screws
10 cm
ver.
Figure 3
Figure 3
Separate purchase(Wall Mounting Bracket)
Model 24"/32"
VESA (A x B)
100 x 100
Standard
M4
screw
Number of
2
screws
Wall mount bracket
24"/32"
(*Not Provided)
(*Not Provided)
43"
200 x 200
M4
2
43"