Maintenance And Care; Notes Regarding Environmental Protection; Optionally Available Accessories; Contact Information - APA 20991 Manuel De L'opérateur

7. MAINTENANCE AND CARE

Clean the polishing machine after each use. Pay particular attention to ensure the ventilations slots are clean. To
do this, use a dry, soft cloth. Do not use aggressive cleaning agents or solvents. Never allow liquids to get into the
device. You can use compressed air at a low-pressure to blow-out the device.
The polishing hood can be washed by hand in warm water. Leave the polishing hood to air dry.
Element 1.pdf
Store the polishing machine without the hood. Position the polishing machine in such a way that the polishing
plate is not distorted. Do not place other objects on the polishing plate.
The carbon brushes may only be replaced after the guarantee has expired and this may only be carried
out by a specialist electrical company.

8. NOTES REGARDING ENVIRONMENTAL PROTECTION

Do not dispose of electrical devices with the household waste! Electrical and electronic scrap must be
collected separately and disposed of in an environmentally responsible manner for recycling. Please
contact your community or city administration regarding disposal options for electrical and electronic
scrap.

9. OPTIONALLY AVAILABLE ACCESSORIES

20980 Polishing hoods, towelling, diameter 180 mm
20981 Polishing hoods, wool, diameter 180 mm
20994 Polishing pads, diameter 180 mm
20997 Polishing sponge, soft, thickness 50 mm, diameter 180 mm

10. CONTACT INFORMATION

EAL GmbH
Otto-Hausmann-Ring 107
42115 Wuppertal, Germany
1 25.01.19 10:55
+49 (0)202 42 92 83 0
+49 (0) 202 42 92 83 – 160
info@eal-vertrieb.com
www.eal-vertrieb.com
11