Proficook PC-WK1235 Mode D'emploi page 38

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 22
Troubleshooting
Before you contact an authorized specialist
Problem
Cause / Action
Unit is not
∙ Check the power supply / temper-
working
ature setting / ambient temperature.
properly or
∙ Unblock the ventilation openings,
at all
install the appliance freely.
Loading is
∙ Check the temperature setting /
too warm
ambient temperature. ∙ Open the
door only as long as necessary.
Loud noise
∙ Check the appliance position.
during op-
∙ See the section
eration
Water un-
∙ Check the condensation collection
der the unit
tray on the appliance back, empty if
necessary.
Light does
∙ Check the power supply.
not work
∙ See
NOTE:
If a problem persists after following the steps above,
contact your trader or an authorized technician.
Technical Data
Climate class SN/N: this appliance is intended to be
used at ambient temperature ranging from 10°C to
32°C.
Electrical connection............................................
Power voltage: .........................220-240 V~ / 50 Hz
Rated current: ...........................................0.55 A
Dimension H x W x D / Weight...............................
Appliance size: ......................84.0 x 48.2 x 47.0 cm
Net weight: ...................................approx. 27.0 kg
For more information about the product, scan the
QR code on the supplied energy label and/or visit the
official website of the product data bank:
https://eprel.ec.europa.eu
"Operating noise".
"Changing the bulb".
The right to make technical and design modifications
during continuous product development remains
reserved.
This appliance has been tested according to all rele-
vant current CE guidelines, such as electromagnetic
compatibility and low voltage directives, and has
been constructed in accordance with the latest safety
regulations.
Meaning of the "Dustbin" Symbol
Protect our environment; do not dispose of electrical
equipment in the domestic waste.
Please return any electrical equipment that you will
no longer use to the collection points provided for
their disposal.
This helps avoid the potential effects of incorrect
disposal on the environment and human health.
This will contribute to the recycling and other forms of
reutilization of electrical and electronic equipment.
Information concerning where these can be disposed
of can be obtained from your local authority. Your
dealer and contractual partner is also obliged to take
back the old appliance free of charge.
WARNING:
Remove or disable any existing snap and bolt locks if
you take the unit out of operation or dispose it.
38
Disposal

Publicité

Table des Matières
loading

Table des Matières