Use; Starting The Appliance; Preparing Espresso Coffee - La Pavoni LPMGCM03 Manuel D'utilisation

13. Pressurized filter holder*
14. Filter - 1 cup / pod*
15. Filter - 2 cups*
16. Coffee tamper*
17. Automatic Cappuccino maker*
18. Insert for pods
19. Coffee scoop
*Standard only on some models

4. USE

4–1. STARTING THE APPLIANCE
• Open the cover and fill the tank (1)
with fresh clean water, taking care not
to exceed the maximum level of the
tank.
• Turn on the machine by placing the
on / off switch (9) to position "I". The
lamp (9a) lights up to indicate that the
machine is powered.
• Insert the filter holder into the group
head.
• Open the steam / hot water knob (4).
• Move the coffee / hot water switch
lever (10) to position "I". When water
starts to come out of the turbo steam
nozzle (6), move the hot water / coffee
dispensing switch lever (10) to position
"0" and close the knob (4).
After having done this, rinse the internal
circuits:
• Insert the filter holder (12-13) into the
group head (5).
• Place a container under the coffee
dispensing spouts and press the coffee
/ hot water dispensing button (10).
• Repeat this process 5 times.
• After rinsing, wait for the machine to
reach operating temperature. The light
(10a) comes on to indicate that the
temperature has been reached.
• After having done this, rinse the
internal circuits:
To avoid having to repeat this
procedure, we recommend that
you check the level of water in
the tank (1) to prevent emptying
the machine's water circuit. If this
does happen, repeat the above
procedure.
Take care not to pour water onto
the connector when filling the
tank.
The operating temperature light
(11a) will continue to switch on
and off automatically during
heating.
After having switched on the machine,
wait about 6 minutes for it to heat up
before making the first coffee.
4–2. PREPARING ESPRESSO COFFEE
Make sure that you have carried out all
the operations indicated in section 4.1

"starting the appliance".

PRE-HEATING
• Make sure there is enough water in
the tank (1).
• Insert the filter holder (12) into the
group head, without a filter.
• Turn on the main switch (9), the power
on light (9a) will come on to indicate
that the machine is in operation.
• Wait until machine reaches the
operating temperature in order
to dispense a coffee. The light
(10a) comes on to confirm that the
temperature has been reached.
PREPARING ESPRESSO COFFEE USING A
STANDARD FILTER HOLDER
• After pre-heating, remove the filter
holder (12), select the 1-cup filter (14)
if you wish to make one coffee or the
2-cup filter (15) if you wish to make
two coffees and place it into the filter
holder.
23