Safety Test Leads; General Specifications - Wavetek 2020 Manuel D'utilisation

2020/30.Man.3x5,25/XPr
The test leads included with your meter have shrouded banana plugs to
eliminate the possibility of shock if the plugs accidentally pull out of the
meter while making a measurement. The test leads also have insulated
probe tips to avoid causing shorts when making measurements in dense
component areas. Replacement part number for safety test leads is TL245.
D • Sicherheitsmeßkabel
Die Meßkabel haben versenkte Bananenstecker um elektrischen Schock zu
vermeiden. Die Meßspitzen sind zum Teil isoliert, um Kurzschlüsse in dichten
Schaltungen zu vermeiden. Diese Isolation kann entfernt werden.
E • Puntas de Prueba de Seguridad
Las puntas de prueba suministradas con el multímetro incluyen unos conectores
de banana protegidos para eliminar la posibilidad de descargas eléctricas. Las
puntas están parcialmente aisladas para evitar cortocircuitos en áreas con alta
densidad de componentes. El usuario puede quitar dicho aislante si lo desea.
F • Cordons de Sécurité
Les fiches banane des cordons sont munis de protecteurs fixes afin de supprimer
les risques de chocs électriques. Les pointes métalliques sont partiellement
isolées pour éviter des court-circuits dans des circuits denses. Cette isolation
peut être enlevée.

General Specifications

Display: 5 digit LCD, 18888 counts, with
annunciators, menu features and 41
segment bargraph.
Polarity Indication: Automatic
Zero Adjustment: Automatic
Overrange Indication: OL.
Low Battery Indication:
hours left. Low-battery-cut-off at 6.6V.
Display Update Rate: 2/sec, nominal;
20/sec for bargraph.
Operating Temp.: 0 to 50°C, 0 to 80%
Relative Humidity
Storage Temp: -40°C to 70°C, 0 to 95%
RH, battery removed
Temperature coefficient: <0.1 x (spec.
accuracy)/°C (0° to 20°C and 30° to
55°C)
Power: Standard 9-volt battery, NEDA
19/06/97 14:36

SAFETY TEST LEADS

SPECIFICATIONS
1604, JIS 006P, IEC 6F22
Auto Power-Off: Meter turns off after 30
minutes of inactivity.
Battery Life (Typical): 200 hours, alkaline
Dimensions (H x W x D): 7.5" x 3.5" x
1.3", (175 x 90 x 34 mm)
Weight (incl. battery): 568 g (20 oz)
Accessories: Test leads, spare fuse,
at 7.5V – 20
battery, and Operator' s Manual
Shock and vibration: MIL-T-28800, class
II
Case material: Flame retardant, high-
impact thermoplastic
Safety: Designed to ??? EN61010-1:
1993/A2:1995 Cat III, UL3111, IP44.
EMC: This product
complies with requirements
of the following European
Community Directives: 89/336/EEC
– 30 –
Page 32