Switching On The Light - Karibu 67000 Notice De Montage

Instructions for use for the user
When the dimmer switch function is deactivated
When the dimmer switch function for the additional output has been deactivated,
you can only switch the additional device on and off. The device will always
operate at full power.
1. Turn the function selector 2 to position C (additional output).
► The additional output symbol lights up.
► In the intensity display, "OFF" appears.
2. Press the intensity selector 3.
► The additional device switches on.
► The intensity selector 3 lights up.
► In the intensity display, "ON" appears.

10.6. Switching on the light

When the dimmer switch function is activated
When the dimmer function for the light is activated, the power for the light can
be set to any level between level 0 and 100. At 0, the light is switched off. 100 cor-
responds to full power.
1. Turn the function selector 2 to position D (light).
► The light symbol lights up.
2. Use the intensity selector 3 to set the preferred light power.
3. Press the intensity selector 3.
► The light switches on.
► The intensity selector 3 lights up.
If the light switch 5 is switched on, the sauna room light will operate at
full power. If you wish to dim the light above the intensity selector 3,
switch off the light switch 5.
WORLD OF WELLNESS
p. 38/52