Using This Unit As A Power Amplifier; Power Cord Hookup - Pioneer A-40AE Manuel D'instructions

Using this unit as a power amplifier

a Analog Audio Cable
a
Connect your pre-amplifier and you can use this unit as a
power amplifier. Connect the P.AMP DIRECT jacks of the
unit and the PRE OUT jacks of the pre-amplifier with an
analog audio cable.
0 Do not connect a source device (CD device, etc.) to the
P.AMP DIRECT jack. Doing so may produce high-volume
sound that can damage the unit, speakers, and various
other devices.
0 Setup: Switch the unit to power amplifier mode to use this
unit as a power amplifier. (p18)

Power Cord Hookup

a Power Cord
This model includes a removable power cord. The power
Pre-amplifier
cord must be connected only after all other connections are
completed. Make sure you first connect the power cord to
AC IN terminal of the unit and then connect to the outlet.
Always disconnect the outlet side first when disconnecting
the power cord.
Preparations
a
13
En