Chapter 3 Control And Safety Devices; Control Devices And Signal Light Devices - Moretti Forni iP 33 Manuel D'instructions

CHAPTER 3
The machine is provided with the following control, security devices and lights (PICT. 3.1-3.2).

3.1 CONTROL DEVICES AND SIGNAL LIGHT DEVICES

On the frontal panel (PICT. 3.1-3.2)
G
F
A1
E
B1
C
POSITION DESCRIPTION
A Upper plate thermoregulator
A1 Signal light of heating element of upper
plate
B Lower plate thermoregulator
B1 Signal light of heating element of lower
plate
C Start buttons
D Timer of contact time between the plates
D1 Pulsante impostazione tempo di contatto
E Main switch
F Adjustment lever to regulate the thickness
of pizza disk
CONTROL AND SAFETY DEVICES
VALUE / C° ± 5%
1 = 56°
2 = 68°
3 = 86°
4 = 104°
5 = 122°
6 = 140°
A
7 = 158°
D
D1
8 = 176°
C
9 = 194°
B
10 = 210°
FUNCTION
Shows the instantaneous upper plate
temperature and allows you to set the its
value
If it is lit, the electrical resistance of upper
plate is on
It shows the instantaneous lower plate
temperature and allows you to set the its
value
If it is lit, the electrical resistance of lower
plate is on
When pressed simultaneously, they start the
movement of lifting from lower plate to
upper plate
It shows the contact time setting
It allows to set the contact time between the
two plates
It turns the machine on and off
It allows to vary the distance between the
two plates and consequently the thickness of
pizza disk.
UK/10
PICT. 3.1