Replacing The Filters - Black & Decker PHV1210 Manuel D'instructions

counterclockwise and carefully slide it clear
of the dust container.
• The dust container can be cleaned.
Wipe with a damp cloth or rinse with
warm soapy water and allow to dry.
• The filters are re-usable and should be
cleaned regularly. Rinse with warm
soapy water and allow to dry.
• Install the pre- filter into the dust
container (11) rotating it clockwise until it
locks into place.
• Install the main filter into the
pre-filter.
• Install the dust container (11) to the
appliance, rotate it clockwise until it locks
into place.
WARNING:
Respiratory Hazard: Never use the appliance
without the filters. Optimum dust collection will
only be achieved with clean filters.
CAUTION:
appliance on when dust container is removed.

Replacing the filters

The filters should be replaced every
6 to 9 months and whenever worn or
damaged. Replacement filters are available
from your BLACK+DECKER dealer (cat.
no. PVF110):
• Remove the old filters as described
above.
• Fit the new filters as described above.
Maintenance
Use only mild soap and damp cloth to
clean the tool. Never let any liquid get
inside the tool; never immerse any part of the tool into a liquid.
IMPORTANT:
and adjustment (other than those listed in this manual) should be performed by authorized
service centers or other qualified service personnel, always using identical replacement parts.
I
Projectile/
Do not turn
To assure product SAFETY and RELIABILITY, repairs, maintenance
G
H
J
6