Care And Cleaning - IKEA LAGAN Manuel D'utilisation

ENGLISH
Using salt, rinse aid and detergent
• Only use salt, rinse aid and detergent for
dishwasher. Other products can cause
damage to the appliance.
• In areas with hard and very hard water
we recommend to use plain dishwasher
detergent (powder, gel, tablets containing
no additional agents), rinse aid and salt
separately for optimal cleaning and drying
results.
• At least once a month run the appliance
with the use of appliance cleaner which is
particularly suitable for this purpose.
• Detergent tablets do not fully dissolve with
short programmes. To prevent detergent
residues on the tableware, we recommend
that you use the tablets with long
programmes.
• Do not use more than the correct quantity of
detergent. Refer to the instructions on the
detergent packaging.
What to do if you want to stop using multi-
tablets
Before you start to use separately detergent,
salt and rinse aid do the following procedure.
1. Set the highest level of the water softener.
2. Make sure that the salt and rinse aid
containers are full.
3. Start the shortest programme with a rinsing
phase. Do not add detergent and do not load
the baskets.
4. When the programme is completed, adjust
the water softener according to the water
hardness in your area.
5. Adjust the released quantity of rinse aid.
6. Activate the rinse aid empty notification.
Loading the baskets
Refer to the supplied leaflet with examples
of the load of the baskets.
• Only use the appliance to wash items that
are dishwasher-safe.
• Do not put in the appliance items made of

Care and cleaning

Warning! Before maintenance, deactivate
the appliance and disconnect the mains
plug from the main socket.
Dirty filters and clogged spray arms
wood, horn, aluminium, pewter and copper.
• Do not put in the appliance items that can
absorb water (sponges, household cloths).
• Remove remaining food from the items.
• Soak items with remaining burned food in
water.
• Put hollow items (cups, glasses and pans)
with the opening down.
Make sure that cutlery and dishes do not
•
bond together. Mix spoons with other
cutlery.
Make sure that glasses do not touch each
•
other.
• Put small items in the cutlery basket.
Put light items in the upper basket. Make
•
sure that the items do not move.
Make sure that the spray arm can move
•
freely before you start a programme.
Before starting a programme
Make sure that:
The filters are clean and correctly installed.
•
• The cap of the salt container is tight.
• The spray arms are not clogged.
• There is dishwasher salt and rinse aid (unless
you use multi- tablets).
• The position of the items in the baskets is
correct.
• The programme is applicable for the type of
load and for the degree of soil.
• The correct quantity of detergent is used.
Unloading the baskets
For better drying results keep the
appliance door ajar for some minutes
before you remove the dishes.
1. Let the dishes cool down before you remove
them from the appliance. Hot dishes are
easily damaged.
2. First remove items from the lower basket
then the upper basket.
At the end of the program water can still
remain on the sides and on the door of the
appliance.
decrease the washing results. Make a
check regularly and, if necessary, clean
them.
19