Leuze ODS 9 Mode D'emploi page 22

EN
Laser safety notices - laser class 2 (ODS9L2...)
ATTENTION
LASER RADIATION – CLASS 2 LASER PRODUCT
Do not stare into beam!
The device satisfies the requirements of IEC/EN 60825-1:2014 safety
regulations for a product of laser class 2 and complies with 21 CFR
1040.10 except for conformance with IEC 60825-1 Ed. 3., as described
in Laser Notice No. 56, dated May 8, 2019.
Ä
Never look directly into the laser beam, the laser aperture (1) or in
the direction of reflected laser beams! If you look into the beam
path over a longer time period, there is a risk of injury to the retina.
Ä
Do not point the laser beam of the device at persons!
Ä
Interrupt the laser beam using a non-transparent, non-reflective
object if the laser beam is accidentally directed towards a person.
Ä
When mounting and aligning the device, avoid reflections of the
laser beam off reflective surfaces!
Ä
CAUTION! Use of controls or adjustments or performance of pro-
cedures other than specified herein may result in hazardous light
exposition.
Ä
Observe the applicable statutory and local laser protection regula-
tions.
Ä
The device must not be tampered with and must not be changed
in any way.
There are no user-serviceable parts inside the device.
Ä
Repairs must only be performed by Leuze electronic GmbH + Co.
KG.
Ä
The laser radiation emitted from the sensor is collimated.
The laser is operated in pulse mode. Pulse power, pulse duration
and wavelength, see "Technical data".
22