Problem
The display shows "12.00".
The lamp does not operate.
Steam and condensation settle on
the food and in the cavity of the
oven.
There is water inside the oven.
The indicator
is off.
The indicator
is on.
The steam cooking does not work.
The steam cooking does not work.
It takes more than three minutes to
empty the water tank or the water
leaks from the steam inlet opening.
12.2 Service data
If you cannot find a solution to the problem yourself, contact your dealer or an Authorised
Service Centre.
The necessary data for the service centre is on the rating plate. The rating plate is on the front
frame of the oven cavity. Do not remove the rating plate from the oven cavity.
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)
13. ENERGY EFFICIENCY
13.1 Product Information and Product Information Sheet*
Supplier's name
Model identification
Energy Efficiency Index
Energy efficiency class
Possible cause
There was a power cut.
The lamp is defective.
You left the dish in the oven for too
long.
There is too much water in the tank.
There is not enough water in the
tank.
There is no water in the tank.
There is no water in the tank.
Lime obstructs the hole.
There are lime deposits in the oven.
.........................................
.........................................
.........................................
Remedy
Reset the clock.
Replace the lamp.
Do not leave the dishes in the oven
for longer than 15 - 20 minutes after
the cooking process ends.
Deactivate the oven and wipe the
water with a cloth or sponge.
Fill the tank with water until the indi‐
cator comes on. If water starts to
come out inside the oven, and the
indicator is still off, contact a quali‐
fied service engineer.
Fill the tank. If the indicator is still
on, contact a qualified service engi‐
neer.
Fill the water tank.
Check the steam inlet opening. Re‐
move the lime.
Clean the water tank. Refer to
"Cleaning the water tank".
Electrolux
KOCEH70X2 949494041
95.3
A
ENGLISH
25