Télécharger Imprimer la page

Bosch TS2000 Mode D'emploi page 10

Une plateforme de support pour scie à table

Publicité

Les langues disponibles

Les langues disponibles

BM 2610013454 06-10.qxp:BM 2610013454 06-10.qxp 6/1/10 10:36 AM Page 10
Fold Stand Upright
keep fingers clear of
W RNING
hinge points when folding
or unfolding the stand.
1. Slightly lift stand by the black handle.
2. Rotate release lever down to clear locking pins.
3. With both hands on the handle, pull up and
push forward on the stand, figure B, until it
locks in the upright position, figure C.
Lower Stand
1. Rotate the release lever, then pull back on
the stand slightly to disengage. Use foot to
pull out kickbar, if necessary.
2. With both hands on the handle, pull back
and lower the stand until it locks in position.
Lowering Stand to its Lowest Position
Begin with the stand in the locked upright
position, as shown above in figure C.
Firmly grip the handle with both hands and
place one foot against the kick bar. Pull back
on the handle and lower the stand to the
ground, as shown.
Operating Instructions
FIG. B
FIG.
FIG. C
kickbar
-10-

Publicité

loading

Ce manuel est également adapté pour:

Ts3000