Operating Instructions - AIPTEK SportyCam Z3 Manuel D'utilisation

SportyCam Z3 e-Manual

Operating Instructions

Charge: Please completely charge your SportyCam Z3 before the first use. The
power indicator (red led) will blink up slowly while charging and if the
red led is constantly on, the Z3 is fully charged. It takes about 4 hours to
fully charge the device. Now the camera is ready for your first outdoor
action.
Storage: The camera has a built-in internal memory for storage, but you can
insert a micro-SD/SDHC memory card to expand your camera's memory
capacity.
1. Insert the card as the direction of
indication until it reaches the end of the
slot.
2. When the card is inserted successfully,
the icon (
and the internal memory will become
inaccessible.
To remove the card, push the card to release it and then pull it out
gently.
Please Note: When using a brand new memory card, you are recommended to
format the card with the camera. The camera will use the external
!
memory card as the main storage medium. Only when the inserted card
is removed the files will be stored in the built-in memory.
) will appear on screen
www.aiptek.eu
EN
8
Page