Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Continuous shooting
With this setting, you can take up to 6 pictures continuously (VGA image size only) after pressing Shutter key once.
1.
Press SET key to enter the menu.
2.
Press Left / Right keys to select the icon
3.
Press Up / Down keys to select: On / Off.
4.
Press SET key again to confirm and then MODE key to return to photo mode.
Note: When you activate this setting, the image resolution automatically switches to VGA. If it has been changed, the message
"Continue Shot Mode Off" message will be displayed on the screen to remind you that the continuous shooting is only
available when the image size is VGA.
White balance
This setting allows the camera to adjust the color of your photos according to the color of the light source.
1.
Press SET key to enter the menu.
Press Left / Right keys to select White balance.
2.
3.
Press Up / Down keys to select: Auto / Daylight / Cloudy / Fluorescent / Incandescent.
4.
Press SET key again to confirm your selection and then MODE key to return to photo mode.
Color effect
This setting allows you to give a fancy effect to your photos by changing their color.
1.
Press SET key to enter the menu.
2.
Press Left / Right keys to select Color effect.
3.
Press Up / Down keys to select: Stand / Sepia / Monochrome / Vivid.
4.
Press SET key again to confirm your selection and then MODE key to return to photo mode.
Sharpness
This setting allows you to adjust the sharpness of your images, making edges more or less distinct.
1.
Press SET key to enter the menu.
Press Left / Right keys to select Image Sharpness.
2.
3.
Press Up / Down keys to select: Soft / Normal / Sharp.
4.
Press SET key again to confirm your selection and then MODE key to return to photo mode.
12
Publicité
Table des Matières
