Cleaning And Maintenance - Philips HF3490 Mode D'emploi

EnglisH
12
1 Place the Wake-up Light on the base (see section 'Installing the appliance' in chapter
'Preparing for use'). (Fig. 5)
- To remove the base, turn the Wake-up Light upside down, push the release slide on the bottom
of the base in the direction of the arrow. Then pull the base off the Wake-up Light. (Fig. 6)
2 If necessary, place the one of the adapters in the iPod/iPhone station.
3 Place your iPod or iPhone in the iPod/iPhone station (Fig. 24).
The word 'IPOd' appears on the display and the iPod symbol flashes for 3 seconds.
,
After 3 seconds, the word 'IPOd' and the iPod symbol disappear from the display.
,
Note: If you have selected your iPod/iPhone as the alarm sound, the iPod symbol stays on the display.
4 To play music from your iPod/iPhone, you can operate the iPod/iPhone as you normally
would. If you do not know how to use your iPod/iPhone, follow the instructions in the user
manual supplied with your iPod/iPhone.
The sound of the music on your iPod/iPhone comes out of the speaker of the Wake-up Light.
,
Your iPod/iPhone is charged automatically when it is in the iPod/iPhone station.
,
Note: To set the music on your iPod/iPhone as alarm sound, follow the instructions in section 'Setting the
alarm sound' in this chapter.
Note: The iPod/iPhone volume setting does not have an effect on the volume setting of the Wake-up Light
speaker. To set the volume, move the bottom function selector of the Wake-up Light up or down to select
the volume level you prefer
Note: When you have connected your iPhone to the Wake-up Light and a call comes in, the music or the
radio goes out and the default ringtone of the iPhone comes out of the speaker of the Wake-up Light.
Dusk function
You can use the dusk function when you want the light and/or the sound of the Wake-up Light to
stay on and dim gradually during a set period of time (15 minutes to 2 hours) before you go to
sleep. The lamp and/or sound switch off automatically after the set time.
1 Follow the steps in section 'Menu functions of middle function selector (SET)' in this chapter
to select the dusk function and to set the dusk function time.
Note: You can choose a time from 15 to 120 minutes (15, 30, 60, 90 or 120 minutes).
After the set time, no matter whether only the light and/or the radio or your iPod/iPhone
,
music are on, the dusk function switches off both light and sound.

cleaning and maintenance

Never use scouring pads, abrasive cleaning agents or aggressive liquids such as petrol or acetone
to clean the appliance.
Regularly remove dust from the outside of the appliance with a dry cloth.
1 Unplug the appliance before you clean it.
2 Clean the outside of the appliance with a dry cloth.
Do not let water run into the appliance or spill water onto the appliance (Fig. 25).