ENGLISH
NOTE:
When following this procedure from step1 to
step 2, the filter system will be removed; when
following it from Step 2 to Step 1, the filter
system will be installed.
Remarks:
– Inspect the filters for blocking after every
time the dishwasher has been used.
– By unscrewing the coarse filter, you can
remove the filter system. Remove any food
remnants and clean the filters under running
water.
NOTE: The entire filter assembly should
be cleaned once a week.
Cleaning the Filter
To clean the coarse filter and the fine filter, use
a cleaning brush. Reassemble the filter parts
as shown in the figures on the last page and
reinsert the entire assembly in the dishwasher,
positioning it in its seat and pressing downwards.
GB-42
WARNING!
When cleaning the filters, don't knock on
them. Otherwise, the filters could be contorted
and the performance of the dishwasher could be
decreased.
Caring for the Dishwasher
The control panel can be cleaned by using a
lightly dampened cloth.
After cleaning, make sure to dry it thoroughly.
For the exterior, use a good appliance polish
wax.
Never use sharp objects, scouring pads or harsh
cleaners on any part of the dishwasher.
Cleaning the Door
To clean the edge around the
door, you should use only a
soft warm, damp cloth.
To avoid penetration of
water into the door lock and
electrical components, do not
use a spray cleaner of any kind.
ENGLISH
GB-43