Operating The Controller; Season Adjust - Toro CUSTOM COMMAND Guide D'utilisation

. Use the + or – button to select the Day Interval (1–30 days).
D
. Press the
NEXT
E
current setting.
. Use the + or – button to select the desired setting for today.
F

OPERATING THE CONTROLLER

This section includes instructions for the following controller operations:
• % Season Adjust
• Manual Operations
• Off and Rain Delay Modes

% SEASON ADJUST

The % Season Adjust feature enables you to easily increase or decrease
the station run time (by percentage) of all stations assigned to a
selected program. This is handy for making temporary, overall station
run time adjustments without changing the original run time settings.
% Season Adjust values range from 0 to 200% in 10% increments,
with 100% being the normal setting.
For example, as the fall season approaches and the temperature
decreases, you may want to reduce the station time for the stations in
program A by 30%. Later you can return station times to their original
values by setting the % Season Adjust value back to 100%.
Note: It is possible to inadvertently cause start time stacking when
increasing station run time. Careful planning and use of % Season
Adjust will prevent this from happening.
To change the % Season Adjust percentage value of a selected
program:
1. Turn the function dial to the
2. Select Program
3. Use the + and/or – buttons to increase or decrease the percentage
value (0–200%).
4. Turn the function dial to the
Note: The controller displays the % symbol in the
position when % Season Adjust is in use for any
program. During operation, the adjusted run time will be
displayed.
Operating the Controller
button. The controller displays
% Season Adjust
, , or with the
A B C D
Run
TODAY
position.
switch.
Program
position.
Run
and its
15