Setting The Current Time And Date - Toro CUSTOM COMMAND Guide D'utilisation

SETTING THE CURRENT TIME AND DATE

Before you can program the controller for automatic watering, you must
set the controller clock to the current time and date. This controller
features a 365-day calendar with automatic leap year compensation. Once
the date is set, the controller keeps track of the date and enables trouble-
free, odd-even day of the month watering required in some locations.
The time and date apply to all programs. To set the time and date, follow
the steps below.
1. Turn the Function Dial to the
The Hour digits and
2. Press the + button to increase or – button to decrease the hour
digit.
Note: Continuous pressure on the + or – buttons, causes the
display to change rapidly.
3. Press the
Use the + and/or – buttons to set the current minute.
4. Press the
Use the + and/or – buttons to set the current year.
5. Press the
Use the + and/or – buttons to set the current month.
6. Press the
Use the + and/or – buttons to set the current calendar day.
7. Return the Function Dial to the
time and date have been set.
Programming the Controller
10
will flash.
AM / PM
button to select the minutes digits.
NEXT
button to select the year digits.
NEXT
button to select the month.
NEXT
button to select the day digit(s).
NEXT
Current Time & Date
position when the current
Run
position.