Bühler technologies CU-EMA+ Notice De Montage page 14

CU-EMA+
5.2.1 Lock Menu
Some menus can be locked to prevent inadvertently changing
the settings of the unit. This requires setting a code. For in-
formation on setting up or disabling the menu lock please
refer to "Global Settings" (toP) under menu item toP > Loc.
The menu lock is not enabled at the time of delivery, all menu
items can be accessed.
With the menu locked, only the following menu items will be
visible without entering the correct code:
Menu item Explanation
toP > unit Temperature unit selection (°C or °F).
F or Func. Accessing the Favourites menu
NOTICE! This menu may be one that is nor-
mally locked.
5.2.2 Menu navigation overview
When pressing the OK button in normal mode, the display will
show the prompt code if the menu is locked. Use the ▲ and ▼
buttons to enter the correct code and press OK.
If an incorrect code or no code is entered, the menu will not be
unlocked and you will not be able to access all menu items.
If you forgot the password you can always enter master code
287 to access the menu; the menu will be unlocked.
The following image shows an overview of the menu struc-
ture.
14 Bühler Technologies GmbH
Items with a dashed frame will only appear with the respect-
ive settings or with the respective status messages.
The factory settings and ranges are specified in the overview
as well as under the respective menu item. The factory set-
tings apply unless otherwise agreed.
You can cancel entries and menu selections without saving by
pressing the ESC key.
1
Menu:
top
Top Settings
Globale Einstellungen
4
Parameter:
5'C
Eingabe
-20 . . . 60 'C
7
Auswahl oP
op haLf Lo hi
Optional
menu nav-
igation:
2
1. Menu designation
2. Display
3. Brief description
3
5
4. Value input
5. Factory preset
6. Parameter range
6
8
7. Selecting from the list of
values
8.
Factory preset
9.
9
Parameter range/selection
10
10. dashed box = Optional
BX440029 ◦ 10/2020