Assembly Instructions - Kobalt SGY-AIR145 Mode D'emploi

ASSEMBLY INSTRUCTIONS

1. Remove the air inlet protective cap from the
air inlet (B). (See Figure 1)
2. Mount a male plug (not included) by hand into
the air inlet (B). (See Figure 2)
NOTE Use thread sealant tape (not included) on
the male plug and tighten it with a wrench (not
included) for airtight connection. Do not
overtighten.
3. Place 2-3 drops of air tool oil (not included) into
the male plug before each use. (See Figure 3)
1
2
3
9